欢迎来到南昌飚扬实验室工程有限公司官网 


恒温恒湿实验室规划

恒温恒湿实验室规划

2020-02-06    

 Laboratory with constant temperature and constant humidity planning

恒温恒湿实验室规划

Laboratory with constant temperature and constant humidity is a laboratory by some special equipment and technical methods and makes it wet indoor temperature in a certain time and experiment with the requirements of the standard atmosphere.It is a infrastructure which helps the enterprise in the inspection of product quality and the control of the circulation.And it is widely used in textile, wool, chemical fiber, paper, packaging, tobacco production enterprises and the quality inspection, chemical fiber inspection departments and so on. In accordance with the relevant ISO and GB standards, such as textiles, textile materials, paper and cardboard box as the quality of the goods inspection of physics project required in standard atmospheric conditions. In addition to the laboratory with constant temperature and constant humidity, there are other special requirements such as 5-18℃ relatively lower temperature,30-80 ℃higher temperature,relative humidity requirements is less than 40% RH temperature or relative humidity above 80% RH such kind of special requirements.

恒温恒湿实验室是将某一实验室通过某些专用设备和技术方法,使其室内温湿度符合某一调湿和试验用标准大气的要求。恒温恒湿实验室是生产企业的产品质量检验与控制和流通领域里的商品质量检验把关的基础设施。恒温恒湿实验室广泛应用于棉纺、毛纺、化纤、纸张、包装、烟草生产企业以及质检、纤检等部门,按照ISO和GB有关标准规定,纺织品、纺织原料、纸张、纸品和纸箱等 商品的物理项目的检验需在标准大气条件下进行。除了常规温湿度的恒温恒湿实验室,还有其它特殊的5-18℃低温、30-80℃高温、相对湿度要求小于40%RH低湿、相对湿度高于80%RH的高湿等特殊要求的恒温恒湿实验室。


The overall design and planning of the laboratory with constant temperature and constant humidity

恒温恒湿实验室总体设计规划要点

01.The extent of temperature and humidity control          温湿度控制范围

02.The accuracy of the temperature and humidity control          温湿度控制精度

03.Cleanliness          洁净度要求          04.Lighting requirements          照度要求

05.The hot humidity range of the equipment          设备的热湿量范围

06.The system of wind bringing and returning of the airconditioning          空调送回风方式  

07.The measures of pneumatic balance          空压之平衡措施 

08.The necessity of introduction of new wind          引入新风之必要性  

09.The necessity of the exhaust system          系统排气的必要性  

10.The heat preservation and heat insulation measures          保温隔热的措施 

11.The equipment and the power configuration          设施与动力之配置  

12.Electrostatic, vibration and noise          静电、振动及噪音   

13.The arrangement of the space of the equipment and airconditioning          设备空间与空调间   

14.In and out of the channel and the buffer of clothes changing          进出通道及更衣缓冲区之安排     

15.Enough space maintenance          足够维护保养空间          16.Ceiling height and floor load          室内净高与楼板载重  

17.Pollution, pollution and control          公害、污染与防灾   

18.The measure of installation and operating costs          安装及运转成本之衡量   

19.The requirements of aesthetic property         美观性要求         20.Installation cost/schedule control        安装成本/工期控制  

21.Operating costs          运转成本          22.Maintainability and flexibility factors, etc          维护性&弹性等因数 


返回上一步